View GRM188_6313435.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

7 1 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. chip monolithic ceramic capacitors for flow/reflow soldering grm15/18/21/31 series n features 1. terminations are made of metal highly resistant to migration. 2. the grm series is a complete line of chip ceramic capacitors in 6.3v, 10v, 16v, 25v, 50v, 100v, 200v and 500v ratings. these capacitors have temperature characteristics ranging from c0g to y5v. 3. a wide selection of sizes is available, from the miniature lxwxt: 1.0x0.5x0.5mm to lxwxt: 3.2x1.6x1.15mm. grm18, 21 and grm31 types are suited to flow and reflow soldering. grm15 type is applied to only reflow soldering. 4. stringent dimensional tolerances allow highly reliable, high speed automatic chip placement on pcbs. 5. the grm series is available in paper or plastic embossed tape and reel packaging for automatic placement. bulk case packaging is also available for grm15, grm18 and grm21. n applications general electronic equipment part number lw t dimensions (mm) e g min. 1.0 0.05 0.5 0.05 0.5 0.05 0.15 to 0.3 0.4 1.6 0.1 0.8 0.1 0.8 0.1 0.2 to 0.5 0.5 0.6 0.1 0.85 0.1 1.0 +0/-0.2 2.0 0.1 1.25 0.1 0.2 to 0.7 0.7 1.25 0.1 0.6 0.1 0.85 0.1 1.15 0.1 1.6 0.15 3.2 0.15 0.3 to 0.8 1.5 1.6 0.2 1.6 0.2 3.2 0.2 * bulk case : 1.6 0.07(l) g 0.8 0.07(w) g 0.8 0.07(t) grm155 GRM188* grm219 grm21a grm216 grm21b grm316 grm319 grm31m grm31c l t w e e g temperature compensating type grm15 series (1.0x0.5 mm) 50v/25v part number l x w [eia] tc rated volt. capacitance (capacitance part numbering code) and t (mm) dimension (t dimension part numbering code) c0g ( 5c ) 50 ( 1h ) p2h ( 6p ) 50 ( 1h ) r2h ( 6r ) 50 ( 1h ) s2h ( 6s ) 50 ( 1h ) 50 ( 1h ) sl ( 1x ) 25 ( 1e ) t2h ( 6t ) 50 ( 1h ) grm15 1.00x0.50 [0402] u2j ( 7u ) 50 ( 1h ) 0.50pf( r50 ) 0.50( 5 ) 0.75pf( r75 ) 0.50( 5 ) 1.0pf( 1r0 ) 0.50( 5 ) 2.0pf( 2r0 ) 0.50( 5 ) 3.0pf( 3r0 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 4.0pf( 4r0 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 5.0pf( 5r0 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 6.0pf( 6r0 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 7.0pf( 7r0 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 8.0pf( 8r0 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 9.0pf( 9r0 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 10pf( 100 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 12pf( 120 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 15pf( 150 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 18pf( 180 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 22pf( 220 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 27pf( 270 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 33pf( 330 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) continued on the following page. please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this pdf catalog to prevent smoking and/or burnin g, etc. this catalog has only typical specifications. therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. ! note c02e10.pdf 04.1.20
8 1 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. continued from the preceding page. part number l x w [eia] tc rated volt. capacitance (capacitance part numbering code) and t (mm) dimension (t dimension part numbering code) c0g ( 5c ) 50 ( 1h ) p2h ( 6p ) 50 ( 1h ) r2h ( 6r ) 50 ( 1h ) s2h ( 6s ) 50 ( 1h ) 50 ( 1h ) sl ( 1x ) 25 ( 1e ) t2h ( 6t ) 50 ( 1h ) grm15 1.00x0.50 [0402] u2j ( 7u ) 50 ( 1h ) 39pf( 390 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 47pf( 470 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 56pf( 560 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 68pf( 680 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 82pf( 820 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 100pf( 101 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 120pf( 121 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 150pf( 151 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 180pf( 181 ) 0.50( 5 ) 0.50( 5 ) 0.50( 5 ) 220pf( 221 ) 0.50( 5 ) 0.50( 5 ) 270pf( 271 ) 0.50( 5 ) 0.50( 5 ) 330pf( 331 ) 0.50( 5 ) 0.50( 5 ) 390pf( 391 ) 0.50( 5 ) 0.50( 5 ) 470pf( 471 ) 0.50( 5 ) 560pf( 561 ) 0.50( 5 ) 680pf( 681 ) 0.50( 5 ) 820pf( 821 ) 0.50( 5 ) 1000pf( 102 ) 0.50( 5 ) the part numbering code is shown in ( ). dimensions are shown in mm and rated voltage in vdc. temperature compensating type grm18 series (1.60x0.80 mm) 200v/100v/50v/25v part number l x w [eia] tc rated volt. capacitance (capacitance part numbering code) and t (mm) dimension (t dimension part numbering code) 200 ( 2d ) 100 ( 2a ) c0g ( 5c ) 50 ( 1h ) p2h ( 6p ) 50 ( 1h ) r2h ( 6r ) 50 ( 1h ) s2h ( 6s ) 50 ( 1h ) 200 ( 2d ) 100 ( 2a ) 50 ( 1h ) sl ( 1x ) 25 ( 1e ) t2h ( 6t ) 50 ( 1h ) grm18 1.60x0.80 [0603] u2j ( 7u ) 50 ( 1h ) 0.50pf( r50 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.75pf( r75 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 1.0pf( 1r0 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 2.0pf( 2r0 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 3.0pf( 3r0 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 4.0pf( 4r0 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 5.0pf( 5r0 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 6.0pf( 6r0 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 7.0pf( 7r0 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 8.0pf( 8r0 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 9.0pf( 9r0 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 10pf( 100 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 12pf( 120 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 15pf( 150 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 18pf( 180 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 22pf( 220 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 27pf( 270 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 33pf( 330 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 39pf( 390 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 47pf( 470 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 56pf( 560 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) continued on the following page. please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this pdf catalog to prevent smoking and/or burnin g, etc. this catalog has only typical specifications. therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. ! note c02e10.pdf 04.1.20
9 1 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. continued from the preceding page. part number l x w [eia] tc rated volt. capacitance (capacitance part numbering code) and t (mm) dimension (t dimension part numbering code) 200 ( 2d ) 100 ( 2a ) c0g ( 5c ) 50 ( 1h ) p2h ( 6p ) 50 ( 1h ) r2h ( 6r ) 50 ( 1h ) s2h ( 6s ) 50 ( 1h ) 200 ( 2d ) 100 ( 2a ) 50 ( 1h ) sl ( 1x ) 25 ( 1e ) t2h ( 6t ) 50 ( 1h ) grm18 1.60x0.80 [0603] u2j ( 7u ) 50 ( 1h ) 68pf( 680 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 82pf( 820 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 100pf( 101 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 120pf( 121 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 150pf( 151 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 180pf( 181 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 220pf( 221 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 270pf( 271 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 330pf( 331 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 390pf( 391 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 470pf( 471 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 560pf( 561 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 680pf( 681 ) 0.80( 8 ) 0.80( 8 ) 0.80( 8 ) 820pf( 821 ) 0.80( 8 ) 0.80( 8 ) 1000pf( 102 ) 0.80( 8 ) 0.80( 8 ) 1200pf( 122 ) 0.80( 8 ) 0.80( 8 ) 1500pf( 152 ) 0.80( 8 ) 0.80( 8 ) 1800pf( 182 ) 0.80( 8 ) 2200pf( 222 ) 0.80( 8 ) 2700pf( 272 ) 0.80( 8 ) the part numbering code is shown in ( ). dimensions are shown in mm and rated voltage in vdc. temperature compensating type grm21 series (2.00x1.25 mm) 200v/100v/50v/25v part number l x w [eia] tc rated volt. capacitance (capacitance part numbering code) and t (mm) dimension (t dimension part numbering code) 200 ( 2d ) 100 ( 2a ) c0g ( 5c ) 50 ( 1h ) c0h ( 6c ) 25 ( 1e ) p2h ( 6p ) 50 ( 1h ) r2h ( 6r ) 50 ( 1h ) s2h ( 6s ) 50 ( 1h ) 200 ( 2d ) 100 ( 2a ) 50 ( 1h ) sl ( 1x ) 25 ( 1e ) t2h ( 6t ) 50 ( 1h ) grm21 2.00x1.25 [0805] u2j ( 7u ) 50 ( 1h ) 12pf( 120 ) 0.85( 9 ) 15pf( 150 ) 0.85( 9 ) 18pf( 180 ) 0.85( 9 ) 22pf( 220 ) 0.85( 9 ) 27pf( 270 ) 0.85( 9 ) 33pf( 330 ) 0.85( 9 ) 39pf( 390 ) 0.85( 9 ) 47pf( 470 ) 0.85( 9 ) 56pf( 560 ) 0.85( 9 ) 68pf( 680 ) 1.25( b ) 0.85( 9 ) 82pf( 820 ) 1.25( b ) 0.85( 9 ) 100pf( 101 ) 1.25( b ) 0.60( 6 ) 120pf( 121 ) 1.25( b ) 0.60( 6 ) 0.85( 9 ) 150pf( 151 ) 1.25( b ) 0.60( 6 ) 1.25( b ) 180pf( 181 ) 1.25( b ) 0.60( 6 ) 0.85( 9 ) 1.25( b ) 220pf( 221 ) 1.25( b ) 0.60( 6 ) 0.85( 9 ) 0.85( 9 ) 1.25( b ) 270pf( 271 ) 0.60( 6 ) 0.85( 9 ) 0.85( 9 ) 0.85( 9 ) 1.25( b ) 330pf( 331 ) 0.60( 6 ) 0.85( 9 ) 0.85( 9 ) 0.85( 9 ) 1.25( b ) 390pf( 391 ) 0.60( 6 ) 1.25( b ) 0.85( 9 ) 0.85( 9 ) 1.25( b ) continued on the following page. please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this pdf catalog to prevent smoking and/or burnin g, etc. this catalog has only typical specifications. therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. ! note c02e10.pdf 04.1.20
10 1 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. continued from the preceding page. part number l x w [eia] tc rated volt. capacitance (capacitance part numbering code) and t (mm) dimension (t dimension part numbering code) 200 ( 2d ) 100 ( 2a ) c0g ( 5c ) 50 ( 1h ) c0h ( 6c ) 25 ( 1e ) p2h ( 6p ) 50 ( 1h ) r2h ( 6r ) 50 ( 1h ) s2h ( 6s ) 50 ( 1h ) 200 ( 2d ) 100 ( 2a ) 50 ( 1h ) sl ( 1x ) 25 ( 1e ) t2h ( 6t ) 50 ( 1h ) grm21 2.00x1.25 [0805] u2j ( 7u ) 50 ( 1h ) 470pf( 471 ) 0.60( 6 ) 1.25( b ) 0.85( 9 ) 0.85( 9 ) 1.25( b ) 0.85( 9 ) 560pf( 561 ) 0.60( 6 ) 1.25( b ) 1.25( b ) 1.25( b ) 0.85( 9 ) 1.25( b ) 680pf( 681 ) 0.85( 9 ) 1.25( b ) 1.25( b ) 0.85( 9 ) 1.25( b ) 820pf( 821 ) 0.85( 9 ) 1.25( b ) 1.25( b ) 0.60( 6 ) 1.25( b ) 0.60( 6 ) 1000pf( 102 ) 0.85( 9 ) 1.25( b ) 0.60( 6 ) 1.25( b ) 0.60( 6 ) 1200pf( 122 ) 1.25( b ) 0.60( 6 ) 1.25( b ) 0.60( 6 ) 1500pf( 152 ) 1.25( b ) 0.85( 9 ) 1.25( b ) 0.85( 9 ) 1800pf( 182 ) 0.60( 6 ) 1.25( b ) 0.85( 9 ) 1.25( b ) 0.85( 9 ) 2200pf( 222 ) 0.60( 6 ) 0.85( 9 ) 0.85( 9 ) 2700pf( 272 ) 0.60( 6 ) 1.25( b ) 1.25( b ) 1.25( b ) 3300pf( 332 ) 0.60( 6 ) 1.25( b ) 1.25( b ) 1.25( b ) 3900pf( 392 ) 0.60( 6 ) 1.25( b ) 0.85( 9 ) 4700pf( 472 ) 0.60( 6 ) 0.85( 9 ) 5600pf( 562 ) 0.85( 9 ) 1.25( b ) 6800pf( 682 ) 0.85( 9 ) 1.25( b ) 8200pf( 822 ) 0.85( 9 ) 10000pf( 103 ) 0.85( 9 ) 0.60( 6 ) 0.60( 6 ) 12000pf( 123 ) 0.60( 6 ) 0.60( 6 ) 15000pf( 153 ) 0.60( 6 ) 0.60( 6 ) 18000pf( 183 ) 0.60( 6 ) 0.60( 6 ) 22000pf( 223 ) 0.85( 9 ) 0.85( 9 ) 27000pf( 273 ) 0.85( 9 ) 0.85( 9 ) 33000pf( 333 ) 1.00( a ) 1.00( a ) 39000pf( 393 ) 1.25( b ) 1.25( b ) 47000pf( 473 ) 1.25( b ) 1.25( b ) the part numbering code is shown in ( ). dimensions are shown in mm and rated voltage in vdc. temperature compensating type grm31 series (3.20x1.60 mm) 500v/200v/100v/50v/25v part number l x w [eia] tc rated volt. capacitance (capacitance part numbering code) and t (mm) dimension (t dimension part numbering code) 500 ( 2h ) 200 ( 2d ) 50 ( 1h ) c0g ( 5c ) 25 ( 1e ) c0h ( 6c ) 25 ( 1e ) p2h ( 6p ) 50 ( 1h ) r2h ( 6r ) 50 ( 1h ) s2h ( 6s ) 50 ( 1h ) 200 ( 2d ) 100 ( 2a ) 50 ( 1h ) sl ( 1x ) 25 ( 1e ) t2h ( 6t ) 50 ( 1h ) grm31 3.20x1.60 [1206] u2j ( 7u ) 50 ( 1h ) 1.0pf( 1r0 ) 1.15( m ) 2.0pf( 2r0 ) 1.15( m ) 3.0pf( 3r0 ) 1.15( m ) 4.0pf( 4r0 ) 1.15( m ) 5.0pf( 5r0 ) 1.15( m ) 6.0pf( 6r0 ) 1.15( m ) 7.0pf( 7r0 ) 1.15( m ) 8.0pf( 8r0 ) 1.15( m ) 9.0pf( 9r0 ) 1.15( m ) 10pf( 100 ) 1.15( m ) 12pf( 120 ) 1.15( m ) 15pf( 150 ) 1.15( m ) 18pf( 180 ) 1.15( m ) 22pf( 220 ) 1.15( m ) continued on the following page. please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this pdf catalog to prevent smoking and/or burnin g, etc. this catalog has only typical specifications. therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. ! note c02e10.pdf 04.1.20
11 1 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. continued from the preceding page. part number l x w [eia] tc rated volt. capacitance (capacitance part numbering code) and t (mm) dimension (t dimension part numbering code) 500 ( 2h ) 200 ( 2d ) 50 ( 1h ) c0g ( 5c ) 25 ( 1e ) c0h ( 6c ) 25 ( 1e ) p2h ( 6p ) 50 ( 1h ) r2h ( 6r ) 50 ( 1h ) s2h ( 6s ) 50 ( 1h ) 200 ( 2d ) 100 ( 2a ) 50 ( 1h ) sl ( 1x ) 25 ( 1e ) t2h ( 6t ) 50 ( 1h ) grm31 3.20x1.60 [1206] u2j ( 7u ) 50 ( 1h ) 27pf( 270 ) 1.15( m ) 33pf( 330 ) 1.15( m ) 39pf( 390 ) 1.15( m ) 47pf( 470 ) 1.15( m ) 56pf( 560 ) 1.15( m ) 68pf( 680 ) 1.15( m ) 82pf( 820 ) 1.15( m ) 270pf( 271 ) 1.15( m ) 330pf( 331 ) 1.15( m ) 390pf( 391 ) 1.15( m ) 470pf( 471 ) 1.15( m ) 560pf( 561 ) 1.15( m ) 680pf( 681 ) 0.85( 9 ) 1.15( m ) 820pf( 821 ) 0.85( 9 ) 0.85( 9 ) 1.15( m ) 1000pf( 102 ) 1.15( m ) 1.15( m ) 0.85( 9 ) 1.15( m ) 1200pf( 122 ) 1.15( m ) 1.15( m ) 1.15( m ) 1.15( m ) 1500pf( 152 ) 1.15( m ) 1.15( m ) 1.15( m ) 1800pf( 182 ) 1.15( m ) 2200pf( 222 ) 1.15( m ) 1.15( m ) 2700pf( 272 ) 1.15( m ) 1.15( m ) 3300pf( 332 ) 1.15( m ) 1.15( m ) 3900pf( 392 ) 1.15( m ) 0.85( 9 ) 1.15( m ) 0.85( 9 ) 4700pf( 472 ) 1.15( m ) 0.85( 9 ) 0.85( 9 ) 5600pf( 562 ) 0.85( 9 ) 0.85( 9 ) 0.85( 9 ) 6800pf( 682 ) 0.85( 9 ) 0.85( 9 ) 1.15( m ) 1.15( m ) 8200pf( 822 ) 0.85( 9 ) 1.15( m ) 1.15( m ) 1.15( m ) 10000pf( 103 ) 0.85( 9 ) 1.15( m ) 12000pf( 123 ) 1.15( m ) 15000pf( 153 ) 1.15( m ) 27000pf( 273 ) 0.85( 9 ) 33000pf( 333 ) 0.85( 9 ) 47000pf( 473 ) 1.15( m ) 56000pf( 563 ) 0.85( 9 ) 0.85( 9 ) 68000pf( 683 ) 1.15( m ) 1.15( m ) 82000pf( 823 ) 1.15( m ) 1.15( m ) 0.10 f( 104 ) 1.60( c ) 1.15( m ) 1.15( m ) the part numbering code is shown in ( ). dimensions are shown in mm and rated voltage in vdc. high dielectric constant type x5r (r6) characteristics tc part number l x w [eia] rated volt. capacitance (capacitance part numbering code) and t (mm) dimension (t dimension part numbering code) 16 ( 1c ) grm15 1.00x0.50 [0402] 10 ( 1a ) 10 ( 1a ) grm18 1.60x0.80 [0603] 6.3 ( 0j ) 10 ( 1a ) grm21 2.00x1.25 [0805] 6.3 ( 0j ) 10 ( 1a ) x5r ( r6 ) grm31 3.20x1.60 [1206] 6.3 ( 0j ) 68000pf( 683 ) 0.50( 5 ) 0.10 f( 104 ) 0.50( 5 ) 0.50( 5 ) 0.33 f( 334 ) 0.80( 8 ) continued on the following page. please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this pdf catalog to prevent smoking and/or burnin g, etc. this catalog has only typical specifications. therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. ! note c02e10.pdf 04.1.20
12 1 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. continued from the preceding page. tc part number l x w [eia] rated volt. capacitance (capacitance part numbering code) and t (mm) dimension (t dimension part numbering code) 16 ( 1c ) grm15 1.00x0.50 [0402] 10 ( 1a ) 10 ( 1a ) grm18 1.60x0.80 [0603] 6.3 ( 0j ) 10 ( 1a ) grm21 2.00x1.25 [0805] 6.3 ( 0j ) 10 ( 1a ) x5r ( r6 ) grm31 3.20x1.60 [1206] 6.3 ( 0j ) 0.47 f( 474 ) 0.80( 8 ) 0.68 f( 684 ) 0.80( 8 ) 1.0 f( 105 ) 0.80( 8 ) 0.80( 8 ) 0.85( 9 ) 1.5 f( 155 ) 0.85( 9 ) 2.2 f( 225 ) 1.25( b ) 1.25( b ) 0.85( 9 ) 3.3 f( 335 ) 1.25( b ) 1.30( x ) 4.7 f( 475 ) 1.25( b ) 1.60( c ) 1.15( m ) 10 f( 106 ) 1.60( c ) 1.60( c ) the part numbering code is shown in each ( ). 3.3 f and 4.7 f, 6.3v rated are grm21 series of l: 2 0.15, w: 1.25 0.15, t: 1.25 0.15. t: 1.15 0.1mm is also available for grm31 1.0 f for 16v. l: 3.2 0.2, w: 1.6 0.2 for grm31 16v 1.0 f type. also l: 3.2 0.2, w: 1.6 0.2, t: 1.15 0.15 for grm31 16v 1.5 f and 2.2 f type. dimensions are shown in mm and rated voltage in vdc. high dielectric constant type x7r (r7) characteristics tc part number l x w [eia] rated volt. capacitance (capacitance part numbering code) and t (mm) dimension (t dimension part numbering code) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) grm15 1.00x0.50 [0402] 10 ( 1a ) 100 ( 2a ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) grm18 1.60x0.80 [0603] 10 ( 1a ) 100 ( 2a ) 50 ( 1h ) 25 ( 1e ) grm21 2.00x1.25 [0805] 16 ( 1c ) 100 ( 2a ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) x7r ( r7 ) grm31 3.20x1.60 [1206] 10 ( 1a ) 220pf ( 221 ) 0.50 ( 5 ) 0.80 ( 8 ) 330pf ( 331 ) 0.50 ( 5 ) 0.80 ( 8 ) 470pf ( 471 ) 0.50 ( 5 ) 0.80 ( 8 ) 680pf ( 681 ) 0.50 ( 5 ) 0.80 ( 8 ) 1000pf ( 102 ) 0.50 ( 5 ) 0.80 ( 8 ) 1500pf ( 152 ) 0.50 ( 5 ) 0.80 ( 8 ) 2200pf ( 222 ) 0.50 ( 5 ) 0.80 ( 8 ) 0.80 ( 8 ) 3300pf ( 332 ) 0.50 ( 5 ) 0.80 ( 8 ) 0.80 ( 8 ) 4700pf ( 472 ) 0.50 ( 5 ) 0.80 ( 8 ) 0.85 ( 9 ) 6800pf ( 682 ) 0.50 ( 5 ) 0.80 ( 8 ) 0.85 ( 9 ) 10000pf ( 103 ) 0.50 ( 5 ) 0.80 ( 8 ) 1.25 ( b ) 15000pf ( 153 ) 0.50 ( 5 ) 0.80 ( 8 ) 22000pf ( 223 ) 0.50 ( 5 ) 0.80 ( 8 ) 33000pf ( 333 ) 0.50 ( 5 ) 0.80 ( 8 ) 0.80 ( 8 ) 0.85 ( 9 ) 1.15 ( m ) continued on the following page. please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this pdf catalog to prevent smoking and/or burnin g, etc. this catalog has only typical specifications. therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. ! note c02e10.pdf 04.1.20
13 1 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. continued from the preceding page. tc part number l x w [eia] rated volt. capacitance (capacitance part numbering code) and t (mm) dimension (t dimension part numbering code) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) grm15 1.00x0.50 [0402] 10 ( 1a ) 100 ( 2a ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) grm18 1.60x0.80 [0603] 10 ( 1a ) 100 ( 2a ) 50 ( 1h ) 25 ( 1e ) grm21 2.00x1.25 [0805] 16 ( 1c ) 100 ( 2a ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) x7r ( r7 ) grm31 3.20x1.60 [1206] 10 ( 1a ) 68000pf ( 683 ) 0.80 ( 8 ) 0.80 ( 8 ) 1.25 ( b ) 0.10 f ( 104 ) 0.50 ( 5 ) 0.50 ( 5 ) 0.80 ( 8 ) 0.80 ( 8 ) 0.80 ( 8 ) 1.25 ( b ) 1.25 ( b ) 0.15 f ( 154 ) 0.80 ( 8 ) 0.80 ( 8 ) 1.25 ( b ) 1.25 ( b ) 0.22 f ( 224 ) 0.80 ( 8 ) 0.80 ( 8 ) 1.25 ( b ) 0.85 ( 9 ) 0.33 f ( 334 ) 0.85 ( 9 ) 1.25 ( b ) 0.85 ( 9 ) 0.47 f ( 474 ) 1.25 ( b ) 1.25 ( b ) 0.85 ( 9 ) 1.15 ( m ) 0.68 f ( 684 ) 0.85 ( 9 ) 0.85 ( 9 ) 1.0 f ( 105 ) 1.25 ( b ) 1.15 ( m ) 1.15 ( m ) 0.85 ( 9 ) 0.85 ( 9 ) 1.5 f ( 155 ) 1.60 ( c ) 1.15 ( m ) 2.2 f ( 225 ) 1.60 ( c ) 1.15 ( m ) 0.85 ( 9 ) 3.3 f ( 335 ) 1.60 ( c ) 4.7 f ( 475 ) 1.60 ( c ) the part numbering code is shown in each ( ). the tolerance will be changed to l: 3.2 0.2, w: 1.6 0.2 for grm31 16v 1.0 f type. also l: 3.2 0.2, w: 1.6 0.2, t: 1.15 0.15 for grm31 16v 1.5 f and 2.2 f type. dimensions are shown in mm and rated voltage in vdc. high dielectric constant type y5v (f5) characteristics tc part number l x w [eia] rated volt. capacitance (capacitance part numbering code) and t (mm) dimension (t dimension part numbering code) 50 ( 1h ) 25 ( 1e ) grm15 1.00x0.50 [0402] 16 ( 1c ) 100 ( 2a ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) grm18 1.60x0.80 [0603] 10 ( 1a ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) grm21 2.00x1.25 [0805] 10 ( 1a ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) y5v ( f5 ) grm31 3.20x1.60 [1206] 6.3 ( 0j ) 2200pf ( 222 ) 0.50 ( 5 ) 4700pf ( 472 ) 0.50 ( 5 ) 0.80 ( 8 ) 10000pf ( 103 ) 0.50 ( 5 ) 0.80 ( 8 ) 22000pf ( 223 ) 0.50 ( 5 ) 0.80 ( 8 ) 47000pf ( 473 ) 0.50 ( 5 ) 0.80 ( 8 ) 0.10 f ( 104 ) 0.50 ( 5 ) 0.50 ( 5 ) 0.80 ( 8 ) 0.80 ( 8 ) 0.85 ( 9 ) continued on the following page. 47000pf ( 473 ) 0.50 ( 5 ) 0.80 ( 8 ) 0.80 ( 8 ) 1.25 ( b ) 1.15 ( m ) please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this pdf catalog to prevent smoking and/or burnin g, etc. this catalog has only typical specifications. therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. ! note c02e10.pdf 04.1.20
14 1 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. continued from the preceding page. tc part number l x w [eia] rated volt. capacitance (capacitance part numbering code) and t (mm) dimension (t dimension part numbering code) 50 ( 1h ) 25 ( 1e ) grm15 1.00x0.50 [0402] 16 ( 1c ) 100 ( 2a ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) grm18 1.60x0.80 [0603] 10 ( 1a ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) grm21 2.00x1.25 [0805] 10 ( 1a ) 50 ( 1h ) 25 ( 1e ) 16 ( 1c ) 10 ( 1a ) y5v ( f5 ) grm31 3.20x1.60 [1206] 6.3 ( 0j ) 0.22 f ( 224 ) 0.80 ( 8 ) 1.25 ( b ) 0.85 ( 9 ) 0.47 f ( 474 ) 0.80 ( 8 ) 0.80 ( 8 ) 1.25 ( b ) 1.15 ( m ) 1.0 f ( 105 ) 0.80 ( 8 ) 0.80 ( 8 ) 0.85 ( 9 ) 0.85 ( 9 ) 0.85 ( 9 ) 1.15 ( m ) 0.85 ( 9 ) 2.2 f ( 225 ) 1.25 ( b ) 1.25 ( b ) 1.25 ( b ) 1.15 ( m ) 0.85 ( 9 ) 4.7 f ( 475 ) 1.25 ( b ) 1.15 ( m ) 1.15 ( m ) 1.15 ( m ) 10 f ( 106 ) 1.60 ( c ) 1.15 ( m ) 1.15 ( m ) the part numbering code is shown in each ( ). t: 1.25 0.1mm is also available for grm21 25v or 16v 1.0 f type. dimensions are shown in mm and rated voltage in vdc. high dielectric constant type z5u (e4) characteristics tc part number l x w [eia] rated volt. capacitance (capacitance part numbering code) and t (mm) dimension (t dimension part numbering code) grm18 1.60x0.80 [0603] 50 ( 1h ) grm21 2.00x1.25 [0805] 50 ( 1h ) z5u ( e4 ) grm31 3.20x1.60 [1206] 50 ( 1h ) 10000pf( 103 ) 0.80( 8 ) 22000pf( 223 ) 0.80( 8 ) 47000pf( 473 ) 0.60( 6 ) 0.10 f( 104 ) 0.85( 9 ) 0.22 f( 224 ) 0.85( 9 ) the part numbering code is shown in ( ). dimensions are shown in mm and rated voltage in vdc. please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this pdf catalog to prevent smoking and/or burnin g, etc. this catalog has only typical specifications. therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. ! note c02e10.pdf 04.1.20
no. item specifications test method temperature compensating type see the previous page. within the specified dimensions no defects or abnormalities more than 10,000m or 500 ? f (whichever is smaller) within the specified tolerance (table a) 30pfmin. : q u 1000 30pfmax. : q u 400+20c c : nominal capacitance (pf) within the specified tolerance no defects or abnormalities y 55 to w 125 d operating temperature rated voltage appearance dimensions dielectric strength insulation resistance capacitance q/ dissipation factor (d.f.) capacitance temperature characteristics 1 2 3 4 5 6 7 8 9 using calipers on micrometer the insulation resistance should be measured with a dc voltage not exceeding the rated voltage at 25 d and 75%rh max. and within 2 minutes of charging. the capacitance/q/d.f. should be measured at 25 d at the frequency and voltage shown in the table. (2) high dielectric constant type the ranges of capacitance change compared with the above 25 d value over the temperature ranges shown in the table should be within the specified ranges. the capacitance change should be measured after 5 min. at each specified temperature stage. (1) temperature compensating type the temperature coefficient is determined using the capacitance measured in step 3 as a reference. when cycling the temperature sequentially from step 1 through 5 (c0 ? : w 25 d to w 125 d : other temp. coeffs. : w 25 d to w 85 d ) the capacitance should be within the specified tolerance for the temperature coefficient and capacitance change as table a. the capacitance drift is calculated by dividing the differences between the maximum and minimum measured values in steps 1, 3 and 5 by the capacitance value in step 3. no failure should be observed when * 300% of the rated voltage (c0 d to u2j and sl) or * 250% of the rated voltage (x5r, x7r, z5u and y5v) is applied between the terminations for 1 to 5 seconds, provided the charge/discharge current is less than 50ma. * 200% for 500v visual inspection the rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. when ac voltage is superimposed on dc voltage, v p-p or v o-p , whichever is larger, should be maintained within the rated voltage range. high dielectric type r6 : y 55 to w 85 d r7 : y 55 to w 125 d e4 : w 10 to w 85 d f5 : y 30 to w 85 d [r6, r7] w.v. : 25vmin. : 0.025max. w.v. : 16/10v : 0.035max. w.v. : 6.3v 0.05max.(c f 3.3f) 0.1max.(c u 3.3f) [e4] w.v. : 25vmin. : 0.025max. [f5] w.v. : 25vmin. : 0.05max.(c f 0.10f) : 0.09max.(c u 0.10f) w.v. : 16v/10v : 0.125max. w.v. : 6.3vmax. : 0.15max. r6 : within t 15% ( y 55 to w 85 d ) r7 : within15% ( y 55 to w 125 d ) e4 : within w 22/ y 56% ( w 10 to w 85 d ) f5 : within w 22/ y 82% ( y 30 to w 85 d ) capacitance change temperature coefficient item ? c to 7u, 1x (1000pf and below) 1 t 0.1mhz 0.5 to 5vrms frequency voltage ? c to 7u, 1x (more than 1000pf) 1 t 0.1khz 1 t 0.2vrms char. r6, r7, f5 (10f and below) 1 t 0.1khz 1 t 0.2vrms r6, r7, f5 (more than 10f) 120 t 24hz 0.5 t 0.1vrms e4 1 t 0.1khz 0.5 t 0.05vrms step 1 25 t 2 temperature( d ) 2 y 55 t 3 (for ? c to 7u/1x/r6/r7) y 30 t 3 (for f5) 10 t 3 (for e4) 3 25 t 2 4 125 t 3 (for ? c/r7) 85 t 3 (for other tc) 5 25 t 2 capacitance drift within the specified tolerance (table a) within t 0.2% or t 0.05pf (whichever is larger.) * does not apply to 1x/25v continued on the following page. grm series specifications and test methods 22 4 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this pdf catalog to prevent smoking and/or burnin g, etc. this catalog has only typical specifications. therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. ! note c02e10.pdf 04.1.20
no. item specifications test method temperature compensating type 30pfmin. : q u 1000 30pfmax. : q u 400 w 20c c : nominal capacitance (pf) [r6, r7] w.v. : 25vmin. : 0.025max. w.v. : 16/10v : 0.035max. w.v. : 6.3v : 0.05max. (c f 3.3f) 0.1max. (c u 3.3f) [e4] w.v. : 25vmin. : 0.025max. [f5] w.v. : 25vmin. : 0.05max. (c f 0.10f) : 0.09max. (c u 0.10f) w.v. : 16v/10v : 0.125max. w.v. : 6.3vmax. : 0.15max. no defects or abnormalities within the specified tolerance no removal of the terminations or other defect should occur. adhesive strength of termination vibration resistance deflection 10 11 12 solder the capacitor on the test jig (glass epoxy board) shown in fig. 2 using a eutectic solder. then apply a force in the direction shown in fig. 3. the soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. solder the capacitor to the test jig (glass epoxy board) in the same manner and under the same conditions as (10). the capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55hz. the frequency range, from 10 to 55hz and return to 10hz, should be traversed in approximately 1 minute. this motion should be applied for a period of 2 hours in each of 3 mutually perpendic- ular directions (total of 6 hours). solder the capacitor to the test jig (glass epoxy board) shown in fig. 1 using a eutectic solder. then apply 10n * force in parallel with the test jig for 10 t 1sec. the soldering should be done either with an iron or using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. * 2n (gr p 03) 5n (gr p 15, grm18) high dielectric type appearance capacitance q/d.f. a b c baked electrode or copper foil solder resist (in mm) fig. 1 q s t q s t b q rs t q r s s q r q r a q q s c q r s t s 100 s t q r 40 f 4.5 capacitance meter flexure : v 1 20 50 r230 pressurizing speed : 1.0mm/sec. pressurize 45 45 fig. 3 no crack or marked defect should occur. type a b c gr p 03 gr p 15 grm18 grm21 grm31 grm32 grm43 grm55 0.3 0.4 1.0 1.2 2.2 2.2 3.5 4.5 0.9 1.5 3.0 4.0 5.0 5.0 7.0 8.0 0.3 0.5 1.2 1.65 2.0 2.9 3.7 5.6 type a b c gr p 03 gr p 15 grm18 grm21 grm31 grm32 grm43 grm55 0.3 0.4 1.0 1.2 2.2 2.2 3.5 4.5 0.9 1.5 3.0 4.0 5.0 5.0 7.0 8.0 0.3 0.5 1.2 1.65 2.0 2.9 3.7 5.6 t : 1.6mm (gr p 03/15 : 0.8mm) continued from the preceding page. continued on the following page. (in mm) fig. 2 grm series specifications and test methods 23 4 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this pdf catalog to prevent smoking and/or burnin g, etc. this catalog has only typical specifications. therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. ! note c02e10.pdf 04.1.20
no. item specifications test method temperature compensating type high dielectric type temperature cycle 15 fix the capacitor to the supporting jig in the same manner and under the same conditions as (10). perform the five cycles according to the four heat treatments listed in the following table. let sit for 24 t 2 hours (temperature compensating type) or 48 t 4 hour (high dielectric constant type) at room temperature, then measure. # initial measurement for high dielectric constant type perform a heat treatment at 150 y 10 d for one hour and then let sit for 48 t 4 hours at room temperature. perform the initial measurement. no marking defects within t 2.5% or t 0.25pf (whichever is larger) r6, r7 : within t 7.5% e4, f5 : within t 20% appearance the measured and observed characteristics should satisfy the specifications in the following table. more than 10,000m or 500 ? f (whichever is smaller) within t 2.5% or t 0.25pf (whichever is larger) 30pfmin. : q u 1000 30pfmax. : q u 400 w 20c c : nominal capacitance (pf) resistance to soldering heat 14 preheat the capacitor at 120 to 150 d for 1 minute. immerse the capacitor in a eutectic solder solution at 270 t 5 d for 10 t 0.5 seconds. let sit at room temperature for 24 t 2 hours (temperature compensating type) or 48 t 4 hours (high dielectric constant type), then measure. # initial measurement for high dielectric constant type perform a heat treatment at 150 y 10 d for one hour and then let sit for 48 t 4 hours at room temperature. perform the initial measurement. * preheating for grm32/43/55 r6, r7 : within t 7.5% e4, f5 : within t 20% [r6, r7] w.v. : 25vmin. : 0.025max. w.v. : 16/10v : 0.035max. w.v. : 6.3v : 0.05max. (c f 3.3f) 0.1max. (c u 3.3f) [e4] w.v. : 25vmin. : 0.025max. [f5] w.v. : 25vmin. : 0.05max. (c f 0.10f) : 0.09max. (c u 0.10f) w.v. : 16v/10v : 0.125max. w.v. : 6.3vmax. : 0.15max. appearance i.r. no failure dielectric strength capacitance change q/d.f. 75% of the terminations are to be soldered evenly and continuously. solderability of termination 13 immerse the capacitor in a solution of ethanol (jis-k-8101) and rosin (jis-k-5902) (25% rosin in weight proportion). preheat at 80 to 120 d for 10 to 30 seconds. after preheating, immerse in eutectic solder solution for 2 t 0.5 seconds at 230 t 5 d . no marking defects capacitance change the measured and observed characteristics should satisfy the specifications in the following table. more than 10,000m or 500 ? f (whichever is smaller) 30pfmin. : q u 1000 30pfmax. : q u 400 w 20c c : nominal capacitance (pf) [r6, r7] w.v. : 25vmin. : 0.025max. w.v. : 16/10v : 0.035max. w.v. : 6.3v 0.05max. (c f 3.3f) 0.1max. (c u 3.3f) [e4] w.v. : 25vmin. : 0.025max. [f5] w.v. : 25vmin. : 0.05max. (c f 0.10f) : 0.09max. (c u 0.10f) w.v. : 16v/10v : 0.125max. w.v. : 6.3vmax. : 0.15max. i.r. no failure dielectric strength q/d.f. step 1 2 100 d to 120 d 170 d to 200 d 1 min. 1 min. temperature time step 1234 temp. ( d ) time (min.) min. operating temp. w 0/ y 3 room temp. max. operating temp. w 3/ y 0 room temp. 30 t 3 2 to 3 30 t 3 2 to 3 continued from the preceding page. continued on the following page. w 0 w 0 grm series specifications and test methods 24 4 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this pdf catalog to prevent smoking and/or burnin g, etc. this catalog has only typical specifications. therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. ! note c02e10.pdf 04.1.20
no. item specifications test method temperature compensating type high dielectric type 16 humidity steady state the measured and observed characteristics should satisfy the specifications in the following table. let the capacitor sit at 40 t 2 d and 90 to 95% humidity for 500 t 12 hours. remove and let sit for 24 t 2 hours (temperature compensating type) or 48 t 4 hours (high dielectric constant type) at room tem- perature, then measure. appearance no marking defects capacitance change within t 5% or t 0.5pf (whichever is larger) r6, r7 : within t 12.5% e4, f5 : within t 30% q/d.f. 30pf and over : q u 350 10pf and over 30pf and below : q u 275 w 5c/2 10pf and below : q u 200 w 10c c : nominal capacitance (pf) [r6, r7] w.v. : 25vmin. : 0.05max. w.v. : 16/10v : 0.05max. w.v. : 6.3v 0.075max. (c f 3.3f) 0.125max. (c u 3.3f) [e4] w.v. : 25vmin. : 0.05max. [f5] w.v. : 25vmin. : 0.075max. (c f 0.10f) : 0.125max. (c u 0.10f) w.v. : 16v/10v : 0.15max. w.v. : 6.3vmax. : 0.2max. i.r. more than 1,000m or 50 ? f (whichever is smaller) dielectric strength no failure 17 humidity load the measured and observed characteristics should satisfy the specifications in the following table. apply the rated voltage at 40 t 2 d and 90 to 95% humidity for 500 t 12 hours. remove and let sit for 24 t 2 hours (temperature compensating type) or 48 t 4 hours (high dielectric constant type) at room temperature, then measure. the charge/discharge current is less than 50ma. # initial measurement for f5/10v max. apply the rated dc voltage for 1 hour at 40 t 2 d . remove and let sit for 48 t 4 hours at room temperature. perform initial measurement. appearance no marking defects capacitance change within t 7.5% or t 0.75pf (whichever is larger) r6, r7 : within t 12.5% e4 : within t 30% f5 : within t 30% [w.v. : 10vmax.] f5 : within w 30/ y 40% q/d.f. 30pf and over : q u 200 30pf and below : q u 100 + 10c/3 c : nominal capacitance (pf) [r6, r7] w.v. : 25vmin. : 0.05max. w.v. : 16/10v : 0.05max. w.v. : 6.3v 0.075max. (c f 3.3f) 0.125max. (c u 3.3f) [e4] w.v. : 25vmin. : 0.05max. [f5] w.v. : 25vmin. : 0.075max. (c f 0.10f) : 0.125max. (c u 0.10f) w.v. : 16v/10v : 0.15max. w.v. : 6.3vmax. : 0.2max. dielectric strength no failure i.r. more than 500m or 25 ? f (whichever is smaller) continued from the preceding page. continued on the following page. grm series specifications and test methods 25 4 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this pdf catalog to prevent smoking and/or burnin g, etc. this catalog has only typical specifications. therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. ! note c02e10.pdf 04.1.20
* nominal values denote the temperature coefficient within a range of 25 d to 125 d (for ? c)/85 d (for other tc). 5c 6c 6p 6r 6s 6t 7u 1x y 00 0 t 0 30 y 00 0 t 0 60 y 150 t 0 60 y 220 t 0 60 y 330 t 0 60 y 470 t 0 60 y 750 t 120 w 350 to y 1000 0.25 0.38 1.02 1.32 1.79 2.39 3.84 y 0.40 0.59 1.61 2.08 2.81 3.75 6.04 y 0.58 0.87 2.33 3.02 4.09 5.46 8.78 y y 0.11 y 0.21 0.32 0.56 0.95 1.44 2.21 y y 0.17 y 0.33 0.50 0.88 1.49 2.26 3.47 y y 0.24 y 0.48 0.72 1.28 2.16 3.28 5.04 y char. code nominal values (ppm/ d )* capacitance change from 25 d (%) max. min. y 30 y 10 max. min. table a no. item specifications test method temperature compensating type high dielectric type 18 high temperature load the measured and observed characteristics should satisfy the specifications in the following table. apply 200% of the rated voltage for 1000 t 12 hours at the maximum operating temperature t 3 d . let sit for 24 t 2 hours (temperature compensating type) or 48 t 4 hours (high dielectric constant type) at room temperature, then measure. the charge/discharge current is less than 50ma. # initial measurement for high dielectric constant type. apply 200% of the rated dc voltage for one hour at the maximum operating temperature t 3 d . remove and let sit for 48 t 4 hours at room temperature. perform initial measurement. * 150% for 500v and c u 10f appearance no marking defects capacitance change within t 3% or t 0.3pf (whichever is larger) r6, r7 : within t 12.5% e4 : within t 30% f5 : within t 30% (cap f 1.0f) f5 : within w 30/ y 40% (cap u 1.0f) q/d.f. 30pf and over : q u 350 10pf and over 30pf and below : q u 275 + 5c/2 10pf and below : q u 200 + 10c c : nominal capacitance (pf) [r6, r7] w.v. : 25vmin. : 0.05max. w.v. : 16/10v : 0.05max. w.v. : 6.3v 0.075max. (c f 3.3f) 0.125max. (c u 3.3f) [e4] w.v. : 25vmin. : 0.05max [f5] w.v. : 25vmin. : 0.075max. (c f 0.10f) : 0.125max. (c u 0.10f) w.v. : 16v/10v : 0.15max. w.v. : 6.3vmax. : 0.2max. i.r. more than 1,000m or 50 # f (whichever is smaller) dielectric strength no failure y 55 max. min. continued from the preceding page. grm series specifications and test methods 26 4 ! note ?please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, e tc. ?this catalog has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. please read rating and ! caution (for storage, operating, rating, soldering, mounting and handling) in this pdf catalog to prevent smoking and/or burnin g, etc. this catalog has only typical specifications. therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering. ! note c02e10.pdf 04.1.20

▲Up To Search▲

Price & Availability of GRM188

	To Download GRM188 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .